1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Pneumatic Forging Hammer

< Back

Our pneumatic forging hammer from 9kg to 75kg are widely used by blacksmith for the art forging, from 150kg to 2000kg are widely used in the industrial forging.
Pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending and twisting. It is also used for forging in bolster dies.

Features:

1. Unlike steam hammers or air hammers fed from a supplementary compressor, the Pneumatic forging hammer with its self-contained cylinder, require no ancillary power raising plant.
2. The Pneumatic forging hammer is equipped with a self-priming lubricating oil pump, during operating, it can realize the automatic lubrication.
3. Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.